| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Tuned up and ready to make sawdust! http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=44351 |
Page 1 of 1 |
| Author: | LanceK [ Wed Oct 15, 2014 7:47 am ] |
| Post subject: | Tuned up and ready to make sawdust! |
I lent my sander to my brother for the summer, he had a big project to work on. I got it back this evening and went about putting on a new conveyor belt and drum belt. The old one had seen many better days. Attachment: IMG_8596x.JPG
|
|
| Author: | jfmckenna [ Wed Oct 15, 2014 8:27 am ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
Looking good. I need to tune up my 10-20 with he balancing light bulb trick and a new feed belt. |
|
| Author: | ChuckH [ Wed Oct 15, 2014 9:26 am ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
Looks brand new. I did the same thing on my 18x36 Delta a couple months ago. Sent from my iPad using Tapatalk |
|
| Author: | LanceK [ Wed Oct 15, 2014 9:30 am ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
Yeah it needed it. All I have ever done to it is run wood through it. It was time for some TLC.. |
|
| Author: | Bobc [ Wed Oct 15, 2014 9:40 am ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
What a good brother you are. Good job |
|
| Author: | Goodin [ Wed Oct 15, 2014 11:20 am ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
Hey Lance how hard is it to replace the conveyor belt sand paper? Looks like a pain. |
|
| Author: | LanceK [ Wed Oct 15, 2014 11:23 am ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
Goodin wrote: Hey Lance how hard is it to replace the conveyor belt sand paper? Looks like a pain. The two bolts on the end that hold the conveyor to the frame come off, the belt then slips right on. It took about 20 including messing with the alignment to get the belt to track straight. |
|
| Author: | James Orr [ Wed Oct 15, 2014 8:18 pm ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
jfmckenna wrote: Looking good. I need to tune up my 10-20 with he balancing light bulb trick and a new feed belt. Can you say more? What is the balancing light trick? |
|
| Author: | jfmckenna [ Thu Oct 16, 2014 7:50 am ] |
| Post subject: | Re: Tuned up and ready to make sawdust! |
James Orr wrote: jfmckenna wrote: Looking good. I need to tune up my 10-20 with he balancing light bulb trick and a new feed belt. Can you say more? What is the balancing light trick? Follow this link and you will get all the info you need, it's a nifty little trick: http://www.joewoodworker.com/performax.htm |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|